Description:
Bob Smith Industries BSI-205 Slow-Cure 30 Minute Epoxy, 4.5 oz.
Slow-Cure™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. Slow-Cure ™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with Slow-Cure ™ and Finish-Cure™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.
Directions:
Slow-Cure ™ 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
Slow-Cure ™ has the highest strength of our epoxies and should be applied in temperatures above 70°F. Slow-Cure ™ maintains its strength in both the lowest and highest temperature ranges of our line of epoxies.
Slow-Cure ™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. Slow-Cure ™ works best for forming reinforcing fillets on joints and can be mixed with microballons or other fillers to form putty-like consistency. Slow-Cure ™ is waterproof and forms superior bonds if you’re willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.
Additional Items you may be interested in
- Choosing a selection results in a full page refresh.
