Description:
Bob Smith Industries BSI-126 Super-Gold+ CA Adhesive, 1/2 oz.
Super-Gold Thin and Super-Gold+ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes. Super-Gold does not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF™s. They will not fog clear plastic. Super-Gold+ is ideal for attaching clear canopies in plastic model kits; however, Maxi-Cure is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with Super-Gold + in less than fifteen seconds. For bonding foam to foam, spray a very light fog of Insta-Set to one piece and apply Super-Gold+ to the other before joining. Excess Insta-Set may create too much heat, which can melt the foam. Super-Gold cures to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super-Gold eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Directions:
Unscrew top from nozzle. For finer applications, use the extender tip. Apply Super-Gold+ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set accelerator must be used when bonding two pieces of foam together. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.
