Description:
Bob Smith Industries BSI-203 Mid-Cure 15 Minute Epoxy, 4.5 oz.
Mid-Cure 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for Quik-Cure in most applications. Mid-Cure is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.
Directions:
Mid-Cure 15 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
Mid-Cure should be applied in temperatures above 65oF. It can be used in most applications when you need more working time than Quik-Cure provides. Mid-Cure can be worked for about 10 minutes, with adhesion beginning after about 15 minutes.
Mid-Cure bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. Mid-Cure is our most flexible epoxy. This gives it superior bonding qualities in applications such as hardwood to fiberglass. Mid-Cure's lack of brittleness allows it to form lasting bonds in areas subject to high vibration or stress. Mid-Cure is a water-resistant substitute for Quik-Cure . Full cure in 2-3 hours.
