Description: Digitrax AR1 Automatic Reverse Controller-Single
The easiest most cost effective way to add automatic reversing to one section of your DCC layout.
Features:
- Cost effective automatic reversing for one reversing section or subdistrict
- User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout
- Auto-Reversing manages polarity mismatches on the reversing track section without manually throwing electrical toggle switches or adding another booster
- 8 amp peak, 6 amp continuous Auto-reversing control for a single reversing district.
- Simple to wire 4 wire hookup, no locomotive wiring required
- No external power required, runs off track power
- AR1 operates with or without LocoNet, so it is compatible with all DCC systems.
Alternatives to AR1 for Automatic Reversing on your layout:
- Use a double pole, double throw switch to manually allow for reversing.
- Use one Digitrax booster set for automatic reversing and another set for normal operation.
- Use a PM42 Quad Power Manager to handle 4 power sub-districts.
You can set these up to be automatic reversing or power managers to prevent short circuits from shutting down your layout.
