Description:
Elegoo Black Rapid PLA+ 1.75mm Filament Spool 1KG
With enhanced fluidity, our RAPID PLA+ filament melts rapidly and flows smoothly, allowing for a fast printing speed of up to 600mm/s. This feature ensures that you can complete your printing projects quickly without compromising on quality.
ELEGOO RAPID PLA+ filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking. This feature ensures that your prints are less deformed than usual PLA.
Our filament has a better cooling effect and strong layer bonding capabilities that make it perfect for printing overhangs and bridges. This feature ensures a smooth surface on your final prints with fewer visible layer lines.
RAPID PLA+ filament boasts a dimensional accuracy of +/- 0.02mm and a strict tolerance of 1.75mm diameter, which ensures smooth and consistent filament outflow and reduces the risk of nozzle clogging.
All filaments are fully mechanical wound with a secondary sub-winding and strict manual inspection to ensure that the lines are neatly arranged on the reels, reducing tangles and possible snapping.
Complete dried before packing and vacuum sealed with desiccants in the bag, ensuring that it is free from moisture and dust, and reducing the risk of clogging or bubbles during printing. All filaments adopt an eco-friendly cardboard spool, which is both sturdy and easy to use.
Compatible with most 1.75mm FDM 3D printers, enables fast printing when paired with ELEGOO Neptune 4 series printer.
Features:
Suitable for both high-speed and low-speed printing
Less prone to stringing during high-speed printing
Less-tangle amp; Neatly Wound
Widely Compatible
Specifications:
Density: 1.20 g/cm³
Melt Index: 8.2 (190°C/2.16kg)g/10min
Tensile Strength (X-Y): ? 60 MPa
Elongation At Break (X-Y): 19%
Bending Strength: 80 MPa
Bending Modulus: 2,680 MPa
Charpy Impact Strength: 3.85 kj/m²
Thermal Deformation Temp: 53°C (0.45 MPa)
Fan Duty Cycle: 100%
Line (Dia.) amp; Length: (1.75mm) 330-335m
Rockwell Hardness: 88
Print Layer Thickness (Typical): 0.2 mm
Extrusion Nozzle Temp: 200~230°C (Recommended 220°C)
Heated Bed Temperature: 40-60°C
Printing Speed: 30-600 mm/s
Platform Compatibility: PEI/Glass/Fiberglass Board + PVP Glue Stick or Platform Spray
