Description:
Elegoo Green / Red Silk PLA 1.75mm Filament Spool 1KG
Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish.
Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool (2.2lbs).
Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding.
Designed and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for 24 hours before packaging and vacuum sealed with desiccants in the bag to protect the filament from moisture, no clogging and bubbling problems.
Universal compatibility with most of the common 1.75mm FDM 3D printers on the market due to the high-quality standards in terms of manufacturing accuracy and a small dimensional tolerance of +/- 0.02mm.
Features:
An environmentally friendly thermoplastic, non-toxic, and odorless. It is easier to form than ABS filaments and can be printed with an open 3D printer, the best choice for beginners.
Strong Layer Bonding
Accurate amp; Consistent Dimensions
Tangle-free amp; Neat Spool
Widely Compatible
Specifications:
Density: 1.20 g/cm³
Melt Index: 14 (190°C/2.16kg)g/10min
Tensile Strength (X-Y): ? 50 MPa
Elongation At Break (X-Y): 11.2%
Bending Strength: 91 MPa
Bending Modulus: 1,913 MPa
Charpy Impact Strength: 5.4 kj/m²
Thermal Deformation Temp: 53°C (0.45 MPa)
Fan Duty Cycle: 100%
Line (Dia.) amp; Length: (1.75mm) 330-335m
Rockwell Hardness: 88
Print Layer Thickness (Typical): 0.2 mm
Extrusion Nozzle Temp: 190~220°C (Recommended 205°C)
Heated Bed Temperature: 50-65°C
Printing Speed: 30-70 mm/s
Platform Compatibility: PEI/Glass/Fiberglass Board + PVP glue stick or textured paper
