Adhesives & Tapes

Description: Bob Smith Industries BSI-127 Super-Gold+ CA Adhesive, 1 oz. Super-Gold Thin and Super-Gold+ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure...

Description: Bob Smith Industries BSI-141 Foam-Cure CA Adhesive, 1 oz. Foam-Cure is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant...

Description: Bob Smith Industries BSI-142 Foam-Cure CA Adhesive, 4 oz. Foam-Cure is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant...

Description: Bob Smith Industries BSI-151 Insta-Set Accelerator, 2 oz. Insta-Set is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray...

Description: Bob Smith Industries BSI-152 Insta-Set Accelerator, 8 oz. Insta-Set is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray...

Description: Bob Smith Industries BSI-161 Un-Cure CA Debonder, 1 oz. Un-Cure debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure will dissolve the CA in about a minute. Apply on bonded...

Description: Bob Smith Industries BSI-171 IC-Loc Blue, 1/3 oz. IC-Loc Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Blue is cured, the fasteners can be disassembled...

Description: Bob Smith Industries BSI-201 Quick-Cure 5 Minute Epoxy, 4.5 oz. Quik-Cure 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress...

Description: Bob Smith Industries BSI-203 Mid-Cure 15 Minute Epoxy, 4.5 oz. Mid-Cure 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for Quik-Cure in most applications...

Description: Bob Smith Industries BSI-205 Slow-Cure 30 Minute Epoxy, 4.5 oz. Slow-Cure 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. Slow-Cure can...

Description: Bob Smith Industries BSI-206 Slow-Cure 30 Minute Epoxy, 9 oz. Slow-Cure 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. Slow-Cure can...