Toywurks

This 3/16" (5 mm) diameter two-piece launch rod is necessary for most of Estes larger rockets that are powered by C11, D and E Engines.Can be used in the 2215 Porta-Pad II or 2238 Porta-Pad E launch pad.Also works great when used as an alignment tool on...

Included are 20 each of the orange plugs for A3 mini engines and green plugs for A10 mini engines.

Included are 20 each of the yellow plugs for 1/2A6, A8 and B4 standard engines and magenta plugs for B6 and C6 standard engines.

Included are 20 each of the white plugs for D12 and 29 mm E and F engines and black plugs for C11 and 24 mm E engines.

24 in. (61 cm) nylon parachute designed for bigger rockets, the Pro Series II. Made of high quality nylon to last!

This 6 in. (15.2 cm) parachute is preassembled and ready to use on model rockets that require a smaller parachute.

This 12 in. (30.5 cm) parachute is preassembled and ready to use on model rockets that require a 12 in. parachute.

This 18 in. (46 cm) parachute is preassembled and ready to use on model rockets that require a 18 in. (46 cm) parachute.

This 9 in. (22.9 cm) parachute is preassembled and ready to use on model rockets that require a smaller parachute.

This 24 in. (61 cm) parachute is preassembled and ready to use on model rockets that require a 24 in. parachute.

The flame resistant wadding is required in most Estes rockets unless they are tumble recovery.Contains 75 sheets, enough for about 18-25 flights and is absolutely necessary to launch model rockets.

Contains two 1/8 in. x 18 in and one 1/4 in x 36 in. rubber shock cords and four shock cord mounts.